C:/Users//AppData/Roaming/McNeel/Rhinoceros//Localization/en/Support. So I do believe I have messed up a display setting somewhere. File
thanks for the fast reply. The default values for linetypes are in the document templates, but can be modified by anyone opening the file. I cant edit current linetypes. Any help would be appreciated. The SetLayerLinetype command specifies a linetype for the specified layer. Has anyone else had this issue? This is not an official translation and may contain errors and inaccurate translations. The PDF print driver plays a part in the latter issue and I have tested it with PDF995 here and agree its pretty low res as well as different from the display. In the Import Linetypes dialog box, select the linetypes to import. I dont know if it would be easier for the developers, but Id actually like to have the option for hidden lines to be solid, that way I can set the color to a lighter shade, a thinner thickness, and it will look good. The most likely is that you do not have the checkbox checked for Enable Object's Linetypes. I was pretty sure it was an acceleration issue, because most of the time if i tried to screen shot it, it would look fine on the screen shot LOL thats why i used my life cam to grab the pics. All subsequent line patterns will use the specified units. Not quite sure which lines are missing, but check your display properties for the viewport you are make2d'ing from. Scan this QR code to download the app now. Thank you for answering my complaints and for your explanations! I have tried the english version and the problem was the same. Than I tried to make my own dashed Linetype. Performance will also be affected when dealing with scenes that have a lot of geometry. Also tried to use point separator instead of comma separator, but still no success. To use linetypes defined in another Rhino model. Step 05 Select the lines that need to be changed to a dash line, and under the properties tab on the right: Drop the livetype menu down and select the dash line type you created. Solved by GrantsPirate. Required fields are marked *. I believe the fix was in 7.4. MSLTSCALE = 1 PSLTSCALE = 1 LTSCALE = 1 and I am showing lineweight. There will be some differences in how some of the fancier display modes work. Message 1 of 15 emiller 39247 Views, 14 Replies 02-28-2018 10:11 AM Dashed lines not appearing as dashed in model space (they're solid) in drawing, i have dashed lines that are not showing up as dashed anymore, they're showing up as solid In my document, the line types are not displayed properly. i tried different dpis but hidden lines just look really bad and there seems to be no option. No antialiasing. I cant tell what you are modeling so Im at a loss to suggest an appropriate unit and tolerance setup. Press Esc to remove the selection. Delete The Yes option displays curves using their Linetype properties. Copy the contents of acad.lin and paste into the existing Rhino file. Also note that if you create a very fine dashed linetype and apply it to a number of long curves, it could crash or hang Rhino just because of the sheer number of segments it has to calculate for the display. I made a custom linetype here with 1.00,1.00 and Rhino did not crash. I use ghosted a lot with the kids. That's why you dont "see" the linetype, if your rotate your view in 3d you would see the dashed line. I have already tried to solve the problem in the settings by scaling the type. Restarts the linetype pattern at the beginning of each polyline segment. Check under Visibility/Graphics Overrides - though it may be an Annotation Line, its visibility is controlled by the Lines Category under the Model Categories tab. Dimension
It does work a bit oddly here, not extremely intuitively, but it looks correct. Copy the contents of acad.lin and paste into the existing Rhino file. By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. Thank you. The main sections of this video are timestamped below:1:0. In order to remedy this issue, use the command "DocumentProperties" and select "line types" and change the model space linetype scale value up, until you get the desired effect. Nothing that will affect modeling or performance as the Intel chips arent accelerated anyway. ubermeisters 1 yr. ago Damn. However upon setting these up, when I create a PDF via print the resulting drawing has some of the lines as dashed but others arent. Rhinoceros 5 2010-2015 Robert McNeel & Associates. Ive filed two reports in our system (RH-23181 and RH-23180) for AA control and also improved PDF printing. I appreciate that Technical is a raster output, but it would be great to just be able to set the DPI for it for printouts. Cookie Notice "1,.25,.25,.25" specifies a pattern with a 1-unit dash, .25-unit space, .25-unit dash, .25-unit space. When printing, esp to PDF, the dashed pattern gets changed and appears as dot-dash - more like morse code actually. Reddit and its partners use cookies and similar technologies to provide you with a better experience. Privacy Policy. and our Standard. There's a command setlinetypeacale I think (can't check right now). Land F/X; 3165 Broad St. #114 San Luis Obispo, CA 93401 +1 805-541-1003; Our software tailors AutoCAD . So, theres not really a reason I used that specific small number. Right-click in the drawing area, and choose Properties from the shortcut menu. Outdated graphics drivers. Using linetypes displays curves using dashed or dotted. I have this issue where I want the contour lines in my drawing to all be dashed and at 0.25 width. Linetypes affect only curve objects - not surfaces, solids, or other object types. 2023-05-25 Sets subsequent line patterns to inch units. Smooth Line Display feature is disabled. Cheers guys! I also managed to get Rhino into a non-responsive state by playing around with the linetype pattern a few times. 9 7 comments Add a Comment ubermeisters 1 yr. ago Make a layout of your view, I've never had linetypes work properly in viewports that aren't a layout. Copy a line with the linetype definition and paste it into your current model. I ended up just giving up and leaving them as solid lines, cant be bothered wasting any more time on it, Powered by Discourse, best viewed with JavaScript enabled. Let me know if this should be asked someplace else. Section Selections Settings- checkbox poorly designed in Archicad 26, HIDDEN LINES FOR SLABS NOT WORKING - SAME STOREY. But perhaps if you open it, it wont look the same. Linetypes are a file property, they are stored in the individual Rhino document, not part of general options. Does CTB or STB matter? Still looks like a dashed line though, just with a smaller LTSCALE (0.7 vs 1.0). V5 doesnt like the Intel HD chips at all. when i figured out it was the display i just apologized to the kids and told them the points were there even if they could not see them all. shortribsandwich 4 yr. ago You may also have to change the linetypes scale in the model space. Hello, Thanks for your help in advance.I'm looking to create a dashed line around as a boundary but when i change the layer properties or the line properties the line doesn't actually change. Without the file, its impossible to guess. This does not happen just to this file, but to every rhino file I open. Plot styles. All rights reserved. The only thing I can find is your model tolerance and grid settings dont make any sense. Select Hidden Lines to be created and placed on their own layer. Reddit, Inc. 2023. In Object Properties, change the linetype to dashed. I am wondering why my dashes lines are not appearing dashed, regardless of what line type scale I try. Properties
Standard. Another thing i noticed, if i copy for example the Dashed linetype, the pattern is messed up, it reads: 5,00, 0,00, 0,00, 0,00, 5,00, 0,00, 0,00, 0,00, Version 7 The Text Widget allows you to add text or HTML to your sidebar. If you then modify the 1 and add other numbers, the linetype will update in real time. Welcome to Autodesks Civil 3D Forums. Solution: Try one or more of the following: Force drawing regeneration: On the command line, enter REGEN. Rendered, technical, artistic, and pen may be problematic when you turn off hardware acceleration. "2,.5" specifies a pattern with a 2-unit dash, followed by a 0.5-unit space. Also it fails to import acad.lin - it imports, but when i close the options window and reopen it, the imported linetypes are gone. I have restore default-ed everything in my display properties, but the problem still persists, so I am not sure what went wrong where. I'm still going to stick with my initial response of making sure that all three of your LTSCALE sysvars are set to 1 (LTSCAE, MSLTSCALE, PSLTSCALE). John_Brock (John Brock) March 20, 2018, 8:36pm #2 What system of units are you using? Step 01 In the Command Line Type Document Properties. What type of objects are we talking about? Does anyone else find the hidden lines to be near useless for presentation/printing? Solved by beyoungjr. As @Simon_Blainmentioned, using a feature line rather than a 3D polyline will keep that gap a consistent 10.000' regardless of slope. Set your widths by layer, like AutoCad. Samlauderuel1 5 yr. ago Thanks for the feedback, I filed the solid line option for hidden lines as feature request RH-23195 for future reference. Any other settings I am missing? I can edit new lintypes, but they go back to default once I close the window. Strangely, this seemed to bother the moms and dads more then the kids #kidsthesedays, Powered by Discourse, best viewed with JavaScript enabled, https://wiki.mcneel.com/rhino/faqtolerances. Im not sure when this problem started to occur. Just tried again. I played with the linetype scale, but with no results. A zero-length dash is a dot. This, like many such checkboxes either enables the settings you made in the Parameters section, or over-rides them. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); This is a text widget. Hidden should be a dashed line, however, my drawing is to large to show the line type at the default rhino properties. 1 Like Linetypes cannot be edited Helvetosaur November 28, 2020, 1:54pm #2 Linetypes are a file property, they are stored in the individual Rhino document, not part of general options. 02:46 AM (7.0.20314.3001, 09/11/2020) When I open my About Rhino it says: The default linetypes are no longer editable in V7. In Rhino linetype files, specify units with a designator. cabrams9 19462 Views, 5 Replies 10-02-2017 01:25 PM Dashed lines not appearing in model space I was able to draw dashed lines earlier, but suddenly they appear solid regardless of the linetype I've selected. Ahh I think it was because not all of the lines were joined, this is such a headache because it wont let me select all and join them because some of them are unable to join curve is there a quick way to fix this without going through every single line and fixing it? I am wondering why my dashes lines are not appearing dashed, regardless of what line type scale I try. Ask the community or share your knowledge. Thank you, John, Becarnes and wim for helping me out!! The Microsoft GDI Generic driver does not support high enough OpenGL version for some of the features. Linetypes are assigned as objectand layerproperties. Select "MS Printer Manager", then OK and select your "PDF printer" in the "Name" field. Restarts the linetype pattern when the angle between polyline segments exceeds this value. This happens with all files on these boxes, along with an odd issue where grid lines irregularly draw. Its kind of a brutal approach - just make sure to change it back to whatever you were modeling with. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. Create a free website or blog at WordPress.com. But when I do a printout it is for the customer and needs to look good. My first thought was that it was a scale issue? Those you should be able to edit. Go to Solution. Symbols Project.dwg Report 0 Likes Reply 5 REPLIES Go to Solution. When selected, they are obviously connected lines, but still weirdly dashed. Please post a screenshot of your OpenGL information: In Rhino, go to Rhino Options > View > OpenGL. ). One kid (age 8) stayed over after class and was able to add a r2d2 style lid with a straw hole to her cup! Last modified on Apr 25, 2022 back to top Contact. Properties
I wanted to assign a dashed Linetype to a curve, but it was still displaying it as continuous. What ever i enter as a linetype pattern, it jumps back to 1,0 after closing and reopening the options dialog. Cookie Notice Screenshot (15)|690x388. The buildings in front should be displayed in hidden mode. Pattern Linetypes are defined by a comma-separated list of dash and gap lengths (in model units), always starting with a dash. https://wiki.mcneel.com/rhino/faqtolerances, @wim is right. - last edited on You can check/uncheck different line types depending on what you want to show in your make2d (ie surface isocurves, surface edges, mesh wires, curves etc). Powered by Discourse, best viewed with JavaScript enabled. the option i was asking about is on 2D polylines. I have restore default-ed everything in my display properties, but the problem still persists, so I am not sure what went wrong where. Can't find what you're looking for? 1 2 comments Best Add a Comment bokassa 4 yr. ago In the layers panel, edit the lineweight of each layer. Has anyone else had this issue? Sets the display scale for linetypes to millimeters. Right click the Make2D hidden lines layer and choose 'select objects' in the Layers panel. Seeing kids successfully work on a nice package like Rhino as opposed to a dumbed down kids app was a real joy! For more information, please see our Sets the display scale for linetypes to millimeters. and our In Object Properties, change the linetype to dashed. In the Import Linetypes dialog box, select the linetypes to import. All subsequent line patterns will use the specified units. Causes: Possible causes: "Plot object lineweights"-option isn't checked in the plot dialog. Please attach the 3dm file if its not too big. Lines, splines, and feature lines can also display linetypes, but if you're using 3d polylines, those can't show linetypes and will just display as continuous. A straight line that could be manipulated would be preferable. I but if I modifie to create a dashed line say, 1.00, 2.00 and hit OK, then open it in properties again it jumpes back to 1.00. no matter how many times I edit it it jumps back to 1.00, Hmm, OK, thats not happening here. By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising. Your lines should now appear correctly in your drawing. John: Thank you for your reply! A zero-length dash is a dot. Reddit and its partners use cookies and similar technologies to provide you with a better experience. C:/Users//AppData/Roaming/McNeel/Rhinoceros/5.0/Localization/en/Support. How to adjust your linetypes and its thickness on your viewport.#Rhino3D, #3DTutorials, #Rhino3DTutorials, #3DSurfacing, #3Dmodeling, #3Drendering, #Prototyp. The SetLinetypeScale command can change this setting from Command-line. Turn on or off linetype display in viewports. Dashed lines show in print preview as correct but plot another. Currently my value for "Fit/Smooth" is "None," and my value for "Closed is "No.". Yay! Try setting a couple of system variables. You may choose whether or not you can see the hidden lines, and what layers the visible and hidden lines will appear. They do look like linetype patterns, so did you change the linetype scale in Rhino Options? The default values for linetypes are in the document templates, but can be modified by anyone opening the file. The LinetypeDisplay command configures how linetypes display in viewports. All I get is solid lines. That being said, the overlapping lines appearing as solid would still need to be fixed. This page has been translated for your convenience with an automatic translation service. Sets the global scale factor for all linetype patterns. When viewed from the top, the pattern is shorter on steep lines. A zero-length dash is a dot. our lines in my drawing to all be dashed and at 0.25 width. Linetypes are defined by a comma-separated list of dash and gap lengths (in model units), always starting with a dash. My guess is if you uncheck the copy option on the OpenGL page for using Accelerated hardware modes, you may get better results. Unless your 3D polylines have a serious elevation change in them, linetypes should appear almost normal. The SetLinetype command specifies a linetype for the selected curves. Clipping planes (See google Drive to download template. How it seems to work: First hit the Add button to add a new undefined linetype. Same happening at our office, version : 7.0.20314.3001 Very problematic for daily simple tasks like editing CAD drawings Reddit, Inc. 2023. About Archicad's design tools, element connections, modeling concepts, etc. There are often multiple hidden lines stacked on top of each other of differing lengths, so they appear as a solid line, although it changes with zooming. +1 3d Polylines do not have a linetype generation property, soline segments that are to short to show a full pattern group will be continuous. A setting of the PDF-Viewer. Line weight In the LAYERS panel use the "Print Width" to the far right. Dashed line In Rhino Hello, Thanks for your help in advance. We need a screenshot of the settings in Options > View > OpenGL, I also see this problem. DASHED LINES NOT APPEARING DASHED I think this is a strange issue, and I may be overlooking the solution. 2011-05-28 07:55 PM. The PatternBySegment option restarts the linetype pattern at the beginning of each polyline segment. Imports linetype definitions from a .3dm, .lin or .txt file. Step 03 Click Add to create a new livetype and name Dashed line 01 (for example), Step 04 In the Pattern Field you can set the dash gap spacing for example .125, .125 then hit OK. It puts in just 1.00 and shows you a continuous line. thats right. Thanks for the advice Any display modes i should avoid? By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. I was not aware of Release Candidates. Rhino also crashed while trying to change linetypes. "1,.25,.25,.25" specifies a pattern with a 1-unit dash, .25-unit space, .25-unit dash, .25-unit space. What version number of Rhino 7 do you have? Using linetypes displays curves using dashed or dotted. @bobmcneel, is it just a bug in the current version ? If neither designator is found, mm is used. Sets subsequent line patterns to mm units. Select your model in your custom view space, and type the command Make2D in the Rhino command line. Maybe its worth trying to install the german version and see if it works. I cant wait to see what these kids do with this hurdle fixed! i have lt scale to 1. psltscale to 1. is there a way of having the same line show a different dash scale depending on the scale of the viewport. Note that print width will not show in model space. I have noticed something rather strange happening to the Linetypes Properties. That is my problem then. It's to the right by default. Why did we lose the ability to edit linetypes inside Rhino in V7? Select Hidden Lines to be created and placed on their own layer. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Block entities in a drawing that need redefining. Miru! Has anyone else experienced something similar? I need a dotted line. I tried out your advice. (5.12.50810.13095, 2015-08-10) The SetLinetype command specifies a linetype for the selected curves. I have checked everything I can think off, I have attached the file if anyone could help me out! I will keep this strategy in mind, even though I dont understand what accelerated hardware means. If you have a dashed pattern (for example) defined as 1/2 line followed by 1/2 break, repeated; that is how it will appear on paper, when printed, without regard to print scale. Regards, Terry. Are you running a non-English Windows with regional settings that use a comma as a decimal separator? However upon setting these up, when I create a PDF. Im trying to eliminate Make2d from my workflow, and use more of the awesome new V5 drafting features like history on dimensions to keep everything associative. Hi Brian, having the possibility of showing hidden lines not dashed in technical display would be just perfect! Thanks, Lukas, Rhino 6 technical shows hidden lines as dots and other weird graphics, this should be the priority, not the flair thingy, since it looks like true vector technical display wont appear in the wip would it be possible at least enhance current raster output to look normal? Drawing not set to the correct units or not scaled to the correct size. Sets subsequent line patterns to inch units. For more information, please see our Note: AutoCAD draws objects differently according to the current zoom level. In the Properties Inspector, click Linetype, and then the down arrow. I am working with 3D polylines. Linetypes are stored in the Rhino support folder. They also appear solid in the paper space. I can create new lintypes, but they go back to default once I close the window. In Rhino linetype files, specify units with a designator. You do not have permission to remove this product association. Regarding my questionable tolerance setup, my instructor told us to adjust the tolerence to a small number (vague) to avoid problematic linework when using project and Make2D so I just punched in a lot of 0s. I installed 7.4 and now its working. wolf2503 1 yr. ago I'm new to layouts in Rhino but it's still not showing the linetypes in the layout. In the Top viewport, zoom in on the Make2D result and hide other layers. What happens though, is that every time I try to create a custom linetype, no matter the values I put in, it always jumps back to 1.00. Both ends of the line at the same elevation, and MSLTSCALE = 1. If anyone has any insights or diagnostics they could share I would really appreciate it! The LinetypeDisplay command displays curves using their Linetype properties. On screen it isnt too bad, because its just me seeing it. Despite this, every kid in the class was able to create a nice basic rotated cup and most got to print them! The Make2D options toolbar will come up. The SetLinetypeScale command specifies the global linetype scale from the command line. Drafting. Also, which Service Release of Rhino 5 are you running? I am an speaker/instructor at a coding professional conference and we recently purchased 18 laptops to use for our maker lab. I have similar problems. Step 01 - In the Command Line Type Document Properties Step 02 - When the Dialog box opens, on the left site select the Plus + to drop down the Annotation menu and select Linetypes. Press Enter. If i use 5.00, 5.00 as a pattern, clicking OK in the options dialog doesnt do anything anymore, and when clicking cancel the options window closes, but i cant start any new commands. I honestly have no idea. Privacy Policy. 2 Architecture 2008 Posted December 17, 2010 Hi, I keep having to change the line type scale of my dashed lines all the time to make them look right. I have the german language pack installed. Options Continuous Border Center The other possibility is that you have set the Model View Options to "Show . What service release of version 7 are you on? I also noticed that the embedded linetypes have strange pattern configurations. I recommend having checked "Show Hidden Lines" and "Maintain Source Layers". Hi thanks for the reply, how would I go about doing that? OK, that will be a lot easier for the kids to use i think there are now clear lines and the grids render. I can still pan and zoom, but no new commands will be started and i have to close Rhino in taskmanager. For example, changing the slope of the line to 1:1 reduces the visible gap from 10.0000'to 7.0710'. Rhinoceros 6 2010-2020 Robert McNeel & Associates. Acceleration refers to using the graphics card to render graphics faster/smoother. LINES not showing up properly Rhino Rhino for Windows patriceiayu (Patriceiayu) January 16, 2018, 10:39pm #1 1037706 28.6 KB I'm not sure when this problem started to occur. In the Top viewport, zoom in on the Make2D result and hide other layers. Maybe this FAQ will help: (V6+V7). Linetype's for 3D Polylines was added in C3d 2016 service pack, and is available in C3d 2017 as well. They are all the same make HP pavilion i5 8th gen with intel UHD 620 cards open GL version is 4.4.0. These commands are not documented in HELP. Step 03 - Click Add to create a new livetype and name Dashed line 01 (for example) In the Layers panel, in the Linetypes column, select an option. Right click the Make2D hidden lines layer and choose select objects in the Layers panel. Complex dash-space patterns can be created this way. You can use a text widget to display text, links, images, HTML, or a combination of these. 06:03 PM I think it is fixed in 7.4, I teported the same bug last week. Either you work with 2d polyline or if you really need the 3d element, use a featureline instead, it's linetype will display correctly in 2d. I also tried scaling the tolerance up, but it was still the same problem. every time I try to create a custom linetype, no matter the values I put in, it always jumps back to 1.00. Add Adds a linetype definition. Your email address will not be published. Hi Cormac- you can try temporarily loosening the tolerance in the file and then Join. Solved by dyoung. In Object Properties, under Linetypes, click an option. We ran this years classes with this problem, and it drove the kids nuts! As of now, I can only see proper continuous lines in the artistic view, in every other view the lines are broken and weirdly dashes (as in the picture). Thanks for the suggestion but because all the lines are quite close together it just went crazy! Maybe its a localization issue, i noticed that for example the official Dashed pattern is: 5,00, 5,00, Notice the comma as decimal place, IMO it should be 5.00, 5.00. The default values are the same for all of the default templates, Dashed is 5.00,5.00 and Hidden is 2.00,2.00 for example. Using linetypes displays curves using dashed or dotted. The SetLinetypeScale command specifies the global linetype scale from the command line. at least in display mode there could by setting for hidden line density, Powered by Discourse, best viewed with JavaScript enabled. Depending on material it may require you to adjust the spacing in order to fold easily. This video tutorial goes through the steps to setting up line weights for 2d drawings within Rhino. Tags (5) Tags: dashed line lines linetype scale Report 0 Likes Reply I am using Windows 10 german and Rhino 7 English. Sets the display scale for linetypes to inches. After your lines are all setup next setup your file for the laser according to the Laser Cutter Template. The Linetype properties manage the linetype patterns for the current model. If you are using the 3D polylines for grading, you might start to see that gap appear smaller. Tips designers. Test before sending all of your parts to the laser cutter. Go to Solution. In DocumentProperties > Units page you can change the absolute tolerance if you want to force curves to join.
